The unique structure of geodesic domes presents unique challenges for geodesic dome insulation. This guide will teach you about insulated geodesic domes, including material selection, installation steps, and other considerations for best results.
Choose Geodesic Dome Insulation
Different insulation materials have different insulation properties. So how do we choose the right geodesic dome insulation material according to different needs?
Aluminum Foil Bubble Insulation
Canvas-wrapped aluminum foil bubble insulation (standard version) is made of waterproof 16OZ canvas + aluminum foil foam layer. It is mainly used for glamping domes. The canvas plays a decorative role and the aluminum foil plays a heat insulation role. The thickness of the aluminum foil bubble insulation is 4mm.
Features:
- The canvas lining is waterproof and mildew-proof, and the color is soft and warm.
- The aluminum foil bubble insulation layer can achieve a temperature difference of 15 degrees.
- The theoretical thermal radiation refractive index is 85%.
- The thermal conductivity coefficient is 0.035.
Rubber Insulation
Rubber insulation is often used as integral thermal insulation sheets to cover the dome surface. It is mainly used for large domes to provide heat insulation and noise reduction. It is directly covered on the outside of the frame and fixed to the frame by tightening the outer cloth.
- Rubber insulation is lightweight and easy to install on the geodesic dome structure without adding too much structural burden.
- Rubber insulation is usually made of natural sheet fibers, which are biodegradable and environmentally friendly.
- Its main body is composed of canvas/curtain cloth + needle-punched sheets + Oxford cloth.
- Rubber insulation is 20mm thick and is integral.
Install Geodesic Dome Insulation
[Step 1]
First, open the "Technical Drawing Guide" that came with your order and go to the geodesic dome insulation assembly page. This details the size and location of each part. If you have any questions, contact technical support for help.
[Step 2]
Thread the insulation pieces through the eyelets of the framework's nodes and secure them to the frame using tie wraps. Make sure the tie wraps are tight, but avoid pulling too much to prevent damage to the insulation material.
[Step 3]
Use hook-and-loop fasteners to connect adjacent insulation pieces, which helps maintain integrity and sealing. Make sure all connection points are tight and there are no gaps to prevent the exchange of hot and cold air, which affects the insulation effect.
[Step 4]
Use plastic acorn hex cap nuts to secure the nodes. Make sure each nut is tightened in place to prevent loosening in bad weather.
Note: If you encounter adverse weather conditions, such as strong winds and heavy rain, you can complete the installation of the outer cover first. When the weather turns better, continue with the insulation assembly steps.
How to Achieve the Best Insulation Effect?
The combined use of the following measures can significantly improve the thermal insulation effect of the dome tent, allowing campers to remain comfortable even in cold environments.
Apply a Vapor Barrier
Install a vapor barrier if necessary. Make sure the interior surface of the dome is clean and dry. Lay the vapor barrier over the surface where you will be installing the geodesic dome insulation. Secure with tape or staples, making sure there are no gaps or overlaps. This prevents moisture from seeping through insulation, which is critical in cold climates to avoid condensation problems.
Interior Finishing for Insulated Dome Tent
Consider adding trim over the geodesic dome insulation for both aesthetics and protection. Options include:
Plywood or Wood Panels:
Wood panels are natural and beautiful, blending in with the surrounding interiors and showcasing the architectural beauty of the dome. In addition, wooden floors can reduce heat loss and maintain indoor temperature.
Integrated Partition Wall Design:
Assembled modular production and design, can pre-install water, electricity and water pipes on the wall. All hidden designs make the interior decoration of the accommodation dome more beautiful and the basic functions more complete. The simple installation design can be quickly connected to the hardened platform installation, which can greatly shorten the construction period and reduce the impact of harsh and changeable outdoor environment and climate.
Consider Ventilation
The insulation of the geodesic dome is important. When insulating a dome tent, air circulation inside the dome must also be considered to prevent bacterial growth. Ensuring adequate ventilation can control the humidity and air quality inside the dome. This can be achieved through windows or fans.
A Glass Window: It is fixed to the node with a rod. After opening, just tighten the knob on the telescopic rod. Glass windows have a good ventilation effect and a beautiful appearance.
Cap Vent: The cap vent is a hidden design that allows ventilation. It is more beautiful because it is shaped like cat ears.
Solar Exhaust Fan: Solar exhaust fans can speed up indoor air circulation. They are important for removing indoor heat, moisture and mold. Don't worry when the weather is bad because they are waterproof and hailproof.
Evaluate and Adjust
After installation, monitor the dome's internal temperature and comfort levels. Make adjustments as needed. Regular evaluation and adjustments ensure the longevity and effectiveness of geodesic dome insulation.
Conclusion
Choose the right geodesic dome insulation material, install the insulation material correctly and follow some tips to achieve the effect of the insulated geodesic dome. Shelter Dome meets all your needs. We have deep industry expertise and R&D capabilities, as well as strong production and delivery capabilities. If you have any questions about geodesic dome insulation, contact us!
